Engineering plastic raw materials

HDPE injection grade Prcie:USD 800-1200 / MT FOB Xingang MOQ:5 MT Supply ability:500Mt/Month Payment:L/C,T/T HDPE injection grade

Item	Test Condition	Test Method	Value	Unit
MFR	190°C/2.16kg	ASTM D-1238	20	g/10min
Density	---	ASTM D-792	0.954	g/cm3
Hardness	---	ASTM D-2240	57	Shore D
Tensile strength at break	---	ASTM D-638	14	MPa
Tensile strength at yiled	---	ASTM D-638	28	MPa
Elongation at break	---	ASTM D-638	250	%
Elongation at yiled	---	ASTM D-638	7	%
Impact tensile strength	---	ASTM D-1822	42	kJ/m2
ESCR		ASTM D-1693	3	---
VACIT	---	ASTM D-1525	127	°C

CAS No.9002-88-4

Formula: [CH2CH2]n

EINECS 200-842-0

Applications:

HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. 

Engineering plastic raw materials